M316
The Cat® M316 Excavator provides top performance with up to 14 percent more swing torque and technology options to get the jobdone faster. Save time and money with up to 10 percent overall savings in maintenance costs, longer service intervals, and 100 percent daily ground level maintenance. The M316 gives you the power to work longer while putting money in your pocket.
| Distancia entre ejes | 2550 mm |
|---|---|
| Espacio libre sobre el suelo | 395 mm |
| Brazo | 2.2 m (7' 3") |
| Radio de giro de la cola | 2350 mm |
| Support Point | 3870 mm |
| Espacio libre del contrapeso | 1301 mm |
| Longitud de transporte | 28.3 mm |
| Undercarriage Length | 4970 mm |
| Pluma | 5205 mm (17' 1") |
| Cucharón | GD 0.8 m3 (1.05 yd3) |
| Altura de transporte: parte superior de la cabina | 3194 mm |
| Par de rotación máximo | 44 kN·m |
| Velocidad de rotación | 10.2 r/min |
| Nota (1) | Meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Tier 4 Final emission standards. |
| Nota (2) | Recommended for use up to 3000 m (9,843 ft) altitude with engine power derate above 3000 m (9,843 ft). |
| Nota (3) | Rated speed 2,000 rpm. |
| Emission Standards | Tier 4 Final , EU Stage V, and Korea Tier 4 Final |
| Nota (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2200 mm (7' 3") stick, 3300 kg (7,275 lb) counterweight, undercarriage, and 4 outriggers. |
| Tanque hidráulico | 120 l |
| Sistema hidráulico (incluido el tanque) | 260 l |
| Mando final | 2.5 l |
| Tanque de combustible | 350 l |
| Sistema de enfriamiento | 24 l |
| Potencia del motor: ISO 14396 | 110 kW |
| Calibre | 105 mm |
| Cilindrada | 4.4 l |
| Modelo de motor | Cat C4.4 |
| Presión máxima: equipo | 35000 kPa |
| Presión máxima de desplazamiento | 35000 kPa |
| Presión máxima de rotación | 35000 kPa |
| Operating Weight Minimum | 17000 kg |
| Operating Weight Maximum | 18400 kg |
| Boom Type | VA Boom |
| Stick | R2.2 (7' 3") |
| Bucket | GD 0.8 m3 (1.05 yd3) |
| Digging Height | 5630 mm |
| Reach at Ground Level | 8970 mm |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). |
| Vertical Wall Digging Depth | 4410 ft |
| Cutting Height | 10110 mm |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
