962M Wheel Loader | Front Loader | Tier 4
The 962M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.
| Wheel Base | 3350 mm |
|---|---|
| Ground Clearance | 364 mm |
| Height - Top of Hood | 2694 mm |
| Height - Top of ROPS | 3447 mm |
| Lift Arm Clearance at Maximum Lift | 3477 mm |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length (without bucket) | 7228 mm |
| Hinge Pin Height at Carry Height | 669 mm |
| Hinge Pin Height at Maximum Lift | 4235 mm |
| Maximum Width over Tires (loaded) | 2824 mm |
| Tread Width | 2140 mm |
| Height - Top of Exhaust Pipe | 3411 mm |
| Centerline of Rear Axle to Edge of Counterweight | 2147 mm |
| Centerline of Rear Axle to Hitch | 1675 mm |
| Reverse - 3 | 25.7 km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Reverse - 1 | 6.9 km/h |
| Reverse - 2 | 12 km/h |
| Forward - 1 | 6.9 km/h |
| Forward - 2 | 12 km/h |
| Forward - 3 | 19.3 km/h |
| Forward - 4 | 25.7 km/h |
| Forward - 5 | 39.5 km/h |
| Bucket Capacities | 2.5-9.2 m³ (3.3-12.0 yd³) |
| Breakout Force | 189 kN |
| Note (1) | For a machine configuration as defined under Weight. |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 11709 kg |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 12471 kg |
| Emissions | Tier 4/Stage IV |
| Maximum Net Torque - 1,350 rpm | 1172 N·m |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Maximum Net Power - 2,100 rpm - SAE J1349 | 186 kW |
| Peak Gross Torque - 1,350 rpm - SAE J1995 | 1249 N·m |
| Maximum Net Power - 2,100 rpm - ISO 9249 - Metric | 186 kW |
| Peak Gross Torque - 1,350 rpm - ISO 14396 | 1245 N·m |
| Maximum Net Power - 2,100 rpm - ISO 9249 | 186 kW |
| Maximum Power - 2,100 rpm - SAE J1995 | 202 kW |
| Maximum Power - 2,100 rpm - ISO 14396 | 201 kW |
| Maximum Power - 2,100 rpm - ISO 14396 - Metric | 201 kW |
| Net Power - ISO 9249 | 186 kW |
| Displacement | 7 l |
| Engine Model | Cat C7.1 |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (2) | **For machines in European Union countries and in countries that adopt the EU Directives. |
| Note (3) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 107 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 75 dB(A)* |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 69 dB(A) |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 104 LWA*** |
| Height - Top of Hood | 2694 mm |
| Height - Top of Exhaust Pipe | 3411 mm |
| Height - Top of ROPS | 3447 mm |
| Ground Clearance | 364 mm |
| Centerline of Rear Axle to Edge of Counterweight | 2147 mm |
| Centerline of Rear Axle to Hitch | 1675 mm |
| Wheel Base | 3350 mm |
| Overall Length - Without Bucket | 7228 mm |
| Hinge Pin Height at Maximum Lift | 4235 mm |
| Lift Arm Clearance at Maximum Lift | 3477 mm |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back - Carry Height | 49 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 2140 mm |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Hinge Pin Height at Carry Height | 669 mm |
| Maximum Width - Over Tires - Loaded | 2824 mm |
| Height - Top of Hood | 2691 mm |
| Height - Top of Exhaust Pipe | 3408 mm |
| Height - Top of ROPS | 3444 mm |
| Ground Clearance | 361 mm |
| Centerline of Rear Axle to Edge of Counterweight | 2147 mm |
| Centerline of Rear Axle to Hitch | 1675 mm |
| Wheel Base | 3350 mm |
| Overall Length - Without Bucket | 7228 mm |
| Hinge Pin Height at Maximum Lift | 4524 mm |
| Lift Arm Clearance at Maximum Lift | 3631 mm |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back - Carry Height | 49 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 2140 mm |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Hinge Pin Height at Carry Height | 779 mm |
| Maximum Width - Over Tires - Loaded | 2824 mm |
| Emissions | Tier 4/Stage IV |
| Hydraulic Tank | 125 l |
| Fuel Tank | 275 l |
| DEF Tank | 16 l |
| Transmission | 43 l |
| Cooling System | 59 l |
| Crankcase | 22 l |
| Differential - Final Drives - Front | 43 l |
| Differential - Final Drives - Rear | 43 l |
| Implement System - Maximum Operating Pressure | 29300 kPa |
| Implement System - Maximum Pump Output at 2,150 rpm | 286 l/min |
| Implement Pump Type | Variable Axial Piston |
| Hydraulic Cycle Time - Total | 8.9 s |
| Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.3 m³ (4.3 yd³) general purpose bucket with BOCE.™ |
| Operating Weight | 20226 kg |
| Bucket Range | 2.5-9.2 m³ (3.3-12.0 yd³) |
