279D3 Compact Track Loader
The Cat® 279D3 Compact Track Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power. Its standard, suspended undercarriage system provides superior traction, flotation, stability and speed to work in a wide range of applications and underfoot conditions.
| Ground Clearance | 226 mm |
|---|---|
| Bucket Pin Height - Maximum Lift | 3173 mm |
| Overall Length - Track | 2129 mm |
| Vehicle Width (450 mm/17.7 in tracks) | 1981 mm |
| Length - Track on Ground | 1630 mm |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Length - Without Bucket | 2995 mm |
| Length - With Bucket on Ground | 3714 mm |
| Height - Top of Cab | 2113 mm |
| Maximum Overall Height | 4051 mm |
| Bucket Pin Height - Carry Position | 198 mm |
| Clearance at Maximum Lift and Dump | 2485 mm |
| Departure Angle | 32° |
| Maximum Dump Angle | 39° |
| Turning Radius from Center - Machine Rear | 1796 mm |
| Turning Radius from Center - Coupler | 1410 mm |
| Maximum Reach - With Arms Parallel to Ground | 1373 mm |
| Rack Back Angle - Maximum Height | 84° |
| Turning Radius from Center - Bucket | 2256 mm |
| Reach - Maximum Lift/Dump | 575 mm |
| Net Power | 54.4 kW |
| Net Power - SAE 1349 | 54.4 kW |
| Note | Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan. |
| Peak Torque - 1,500 rpm - SAE J1995 | 265 N·m |
| Net Power - ISO 9249 | 54.9 kW |
| Gross Power - SAE J1995 | 55.4 kW |
| Bore | 94 mm |
| Stroke | 120 mm |
| Displacement | 3.3 l |
| Gross Power | 55.4 kW |
| Engine Model | Cat C3.3B DIT (turbo) |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| Ground Contact Area - With 450 mm/17.7 in Track | 1.47 m² |
| Ground Pressure - With 450 mm/17.7 in Track | 30.4 kPa |
| Rated Operating Capacity with Optional Counterweight | 1540 kg |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Rated Operating Capacities - 50% Tipping Load | 1445 kg |
| Rated Operating Capacities - 35% Tipping Load | 1010 kg |
| Tipping Load | 2885 kg |
| Breakout Force - Tilt Cylinder | 3304 kg |
| Inside Cab** | 83 dB(A) |
| Outside Cab*** | 103 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Hydraulic Tank | 39 l |
| Fuel Tank | 105 l |
| Hydraulic System | 52 l |
| Engine Crankcase | 11 l |
| Cooling System | 14 l |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 57 kPa |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 86 kPa |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 33 kW |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 28000 kW |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 121 l/min |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Operating Weight | 4579 kg |
| Travel Speed - Forward or Reverse - One Speed | 7.2 km/h |
| Travel Speed - Forward or Reverse - Two Speed | 13.3 km/h |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
